SCHEDULED MAINTENANCE

id000000801200


Scheduled Maintenance Table for Europe (L.H.D. U.K.)

except L3 Turbo engine

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months

12

24

36

48

60

72

84

96

108

×1000 km

20

40

60

80

100

120

140

160

180

×1000 miles

12.5

25

37.5

50

62.5

75

87.5

100

112.5

GASOLINE ENGINE
Engine valve clearance
Audibly inspect every 120,000 km (75,000 miles),
if noisy, adjust
Drive belts *1
 
 
I
 
 
I
 
 
I
Spark plugs *2
Replace every 120,000 km (75,000 miles)
Air cleaner element *3
Z6 engine
C
C
R
C
C
R
C
C
R
except Z6 engine
 
 
R
 
 
R
 
 
R
Evaporative system (if installed)
 
 
I
 
 
I
 
 
I
DIESEL ENGINE
Engine valve clearance (for MZR-CD 2.2 engine)
 
 
 
 
 
I
 
 
 
Engine timing belt (for MZ-CD 1.6 (Y6) engine) *4
Replace every 200,000 km (125,000 miles) or 10 years
Drive belts*1
MZR-CD 2.2 engine
 
 
I
 
 
I
 
 
I
MZ-CD 1.6 (Y6) engine
Inspect every 20,000 km (12,500 miles) or 12 months
Replace every 200,000 km (125,000 miles) or 10 years
Fuel filter
 
 
R
 
 
R
 
 
R
Fuel injection system (for MZR-CD 2.2 engine) *5
I
 
I
 
 
I
 
 
I
Fuel system (Drain water)
D
D
 
D
D
 
D
D
 
Air cleaner element *3
MZR-CD 2.2 engine
C
C
R
C
C
R
C
C
R
MZ-CD 1.6 (Y6) engine
 
 
R
 
 
R
 
 
R
GASOLINE AND DIESEL ENGINE
Engine oil *6*7
R
R
R
R
R
R
R
R
R
Engine oil filter *6
R
R
R
R
R
R
R
R
R
Cooling system
 
I
 
I
 
I
 
I
 
Engine coolant
FL22 type *8
Replace every 200,000 km (125,000 miles) or 11 years
Others
Replace at first 100,000 km (62,500 miles) or 4 years;
after that, every 2 years
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
Battery electrolyte level and specific gravity
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
I
I
I
I
I
I
I
Brake fluid *9
 
R
 
R
 
R
 
R
 
Parking brake
I
I
I
I
I
I
I
I
I
Disc brakes
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
Manual transaxle oil
MZ-CD 1.6 (Y6) engine
I
I
I
I
I
I
I
I
I
except MZ-CD 1.6 (Y6) engine
 
 
 
 
R
 
 
 
 
Front and rear suspension, ball joints and wheel bearing axial play
 
I
 
I
 
I
 
I
 
Drive shaft dust boots
 
I
 
I
 
I
 
I
 
Exhaust system and heat shields
Inspect every 80,000 km (50,000 miles) or 5 years
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)
 
R
 
R
 
R
 
R
 
Tires (including spare tire)(with inflation pressure adjustment)
I
I
I
I
I
I
I
I
I
Flat tire repair kit (if installed) *10
Inspect annually


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
D: Drain
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 20,000 km (12,500 miles) or 12 months except MZ-CD 1.6 (Y6) engines. Inspect them more often than the recommended intervals for MZ-CD 1.6 (Y6) engines.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: In the countries below, inspect the spark plugs at every 20,000 km (12,500 miles) or 12 months before replacing them at the said interval.
Croatia, Macedonia, Bosnia and Herzegovina, Serbia, Montenegro, Bulgaria, Romania, Albania, Moldova
*3: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*4: Replacement of the timing belt is required at every 200,000 km (125,000 miles) or 10 years. Failure to replace the timing belt may result in damage to the engine.
*5: Implement the fuel injection amount correction.
*6: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 10,000 km (6,250 miles) or shorter.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*7: For MZR-CD 2.2 engine, reset the engine oil data after replacing the engine oil.
*8: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*9: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*10:Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.

L3 Turbo engine

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months

 

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

5

15

30

45

60

75

90

105

120

135

150

165

180

×1000 miles

3

9

18

27

36

45

54

63

72

81

90

99

108

Engine valve clearance
Audibly inspect every 120,000 km (72,000 miles), if noisy, adjust
Drive belts *1
 
 
 
 
I
 
 
 
I
 
 
 
I
Spark plugs *2
Replace every 90,000 km (54,000 miles)
Air cleaner element *3
Replace every 60,000 km (36,000 miles) or 3 years
Evaporative system (if installed)
 
 
 
 
I
 
 
 
I
 
 
 
I
Engine oil *4
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter *4
R
R
R
R
R
R
R
R
R
R
R
R
R
Cooling system
 
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type *5
Replace every 195,000 km (117,000 miles) or 11 years
Others
Replace at first 90,000 km (54,000 miles) or 4 years;
after that, every 2 years
Fuel lines and hoses
 
 
I
 
I
 
I
 
I
 
I
 
I
Battery electrolyte level and specific gravity
 
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
 
I
I
I
I
I
I
I
I
I
I
I
I
Brake fluid *6
 
 
R
 
R
 
R
 
R
 
R
 
R
Parking brake
 
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
 
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
 
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
 
I
 
I
 
I
 
I
 
I
 
I
Manual transaxle oil
 
 
 
 
 
 
R
 
 
 
 
 
R
Front and rear suspension, ball joints and wheel bearing axial play
 
 
I
 
I
 
I
 
I
 
I
 
I
Drive shaft dust boots
 
 
I
 
I
 
I
 
I
 
I
 
I
Exhaust system and heat shields
 
 
 
 
 
I
 
 
 
 
I
 
 
Bolts and nuts on chassis and body
 
 
T
 
T
 
T
 
T
 
T
 
T
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)
Replace every 40,000 km (24,000 miles) or 2 years
Tires (including spare tire) (with inflation pressure adjustment)
 
I
I
I
I
I
I
I
I
I
I
I
I
Flat tire repair kit (if installed) *7
Inspect annually


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 15,000 km (9,000 miles) or 12 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: In the countries below, inspect the spark plugs at every 15,000 km (9,000 miles) or 12 months before replacing them at the said interval.
Croatia, Macedonia, Bosnia and Herzegovina, Serbia, Montenegro, Bulgaria, Romania, Albania, Moldova, Latvia
*3: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*4: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 10,000 km (6,000 miles) or shorter.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*5: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*6: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*7: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.


Scheduled Maintenance Table for Australia

Note
•  Please ask Mazda dealer to check Mazda computer network to ensure there are no outstanding campaign or recall actions on the vehicle.

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160
GASOLINE ENGINE
Engine valve clearance (Except SKYACTIV-G)
Audibly inspect every 120,000 km, if noisy, adjust
Fuel filter
Replace every 150,000 km
Spark plugs
L3 turbocharger engine
Replace every 100,000 km
Except L3 turbocharger engine
Replace every 120,000 km
Air cleaner element*1
 
 
C
 
 
R
 
 
C
 
 
R
 
 
C
 
Evaporative system (if installed)
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
DIESEL ENGINE
Engine valve clearance
 
 
 
 
 
 
 
 
 
 
 
I
 
 
 
 
Fuel filter
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Fuel injection system*2
 
I
 
 
 
I
 
 
 
 
 
I
 
 
 
 
Fuel system (Drain water)
 
D
 
 
 
D
 
 
 
D
 
 
 
D
 
 
Air cleaner element*1
 
C
 
C
 
R
 
C
 
C
 
R
 
C
 
C
GASOLINE AND DIESEL ENGINE
Drive belts*3
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Engine oil*4*5
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter*4
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type*6
Replace at first 200,000 km or 10 years; after that, every 100,000 km or 5 years
Others
Replace at first 80,000 km or 4 years; after that, every 2 years
Fuel lines and hoses
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Battery electrolyte level and specific gravity
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Brake lines, hoses and connections
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Brake fluid*7
I
I
I
R
I
I
I
R
I
I
I
R
I
I
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Manual transaxle oil
 
 
 
 
 
 
 
 
 
R
 
 
 
 
 
 
Front and rear suspension, ball joints and wheel bearing axial play
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Drive shaft dust boots
 
 
 
I
 
 
 
I
 
 
 
I
 
 
 
I
Exhaust system and heat shields
Inspect every 80,000 km
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
T
 
T
 
T
 
T
All electrical system*8
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
Cabin air filter (if installed)
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Tires (including spare tire)(with inflation pressure adjustment)
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Tire rotation*9
Rotate every 10,000 km or 6 months
Road test
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
M-MDS check of Vehicle Management and Safety Systems
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
D: Drain
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*2: Implement the fuel injection amount correction.
*3: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*4: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*5: For MZR-CD 2.2 engine, use engine oil meeting specification ACEA C1 or JASO DL-1 only.
Reset the engine oil data after replacing the engine oil.
*6: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*7: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*8: This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.
*9: If the vehicle is operated primarily under any of the following conditions, rotate the tires more often than the recommended intervals.
a.  Driving on bumpy roads, gravel roads, snowy roads or dirt roads
b.  Driving uphill and downhill frequently
c.  Repeated short-distance driving
d.  On roads having many roundabouts


Scheduled Maintenance Table for Israel

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

15

30

45

60

75

90

105

120

135

150

165

180
Engine valve clearance
Audibly inspect every 120,000 km, if noisy, adjust
Drive belts*1
I
I
I
I
I
I
I
I
I
I
I
I
Engine oil*2
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter*2
R
R
R
R
R
R
R
R
R
R
R
R
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type*3
Replace every 195,000 km or 10 years
Others
Replace at first 90,000 km or 4 years; after that, every 2 years
Air cleaner element*4
C
C
C
R
C
C
C
R
C
C
C
R
Fuel filter
Replace every 135,000 km
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
Spark plugs
LF engine
Replace every 120,000 km or 3 years
Z6 engine
 
 
R
 
 
R
 
 
R
 
 
R
Evaporative system (if installed)
 
 
 
I
 
 
 
I
 
 
 
I
Battery electrolyte level and specific gravity
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
Brake fluid*5
I
R
I
R
I
R
I
R
I
R
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
Front and rear suspension, ball joints and wheel bearing axial play
I
I
I
I
I
I
I
I
I
I
I
I
Drive shaft dust boots
 
 
I
 
 
I
 
 
I
 
 
I
Exhaust system and heat shields
Inspect every 75,000 km
Bolts and nuts on chassis and body
T
T
T
T
T
T
T
T
T
T
T
T
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)
R
R
R
R
R
R
R
R
R
R
R
R
Tires (including spare tire)(with inflation pressure adjustment)
I
I
I
I
I
I
I
I
I
I
I
I


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 10,000 km or shorter.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 10,000 km or shorter.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*3: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*4: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*5: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.


Scheduled Maintenance Table for Russia/Belarus/Azerbaijan

except L3 Turbo engine

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

15

30

45

60

75

90

105

120

135

150

165

180
Engine valve clearance
Audibly inspect every 45,000 km or 3 years, if noisy, adjust
Drive belts*1
I
I
I
I
I
I
I
I
I
I
I
I
Engine oil
Russia/Belarus*2
R
R
R
R
R
R
R
R
R
R
R
R
Azerbaijan*3
Replace every 5,000 km or 6 months
Engine oil filter
Russia/Belarus*2
R
R
R
R
R
R
R
R
R
R
R
R
Azerbaijan
Replace every 5,000 km or 6 months
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type*4
Replace every 195,000 km or 11 years
Others
Replace at first 90,000 km or 4 years; after that, every 2 years
Air cleaner element*5
Russia/Belarus
C
C
R
C
C
R
C
C
R
C
C
R
Azerbaijan
C
R
C
R
C
R
C
R
C
R
C
R
Fuel pump unit (fuel pump with filter)
Russia/Belarus
Replace every 120,000km
Azerbaijan
 
R
 
R
 
R
 
R
 
R
 
R
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
Spark plugs
LF engine
I
I
I
I
R
I
I
I
I
R
I
I
Z6 engine
I
R
I
R
I
R
I
R
I
R
I
R
Evaporative system (if installed)
 
 
 
I
 
 
 
I
 
 
 
I
Battery electrolyte level and specific gravity
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
Brake fluid*6
 
R
 
R
 
R
 
R
 
R
 
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
I
I
I
I
I
I
I
I
I
Manual transaxle oil
I
I
I
I
R
I
I
I
I
R
I
I
Front and rear suspension, ball joints and wheel bearing axial play
I
I
I
I
I
I
I
I
I
I
I
I
Drive shaft dust boots
I
I
I
I
I
I
I
I
I
I
I
I
Exhaust system and heat shields
I
I
I
I
I
I
I
I
I
I
I
I
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
T
 
T
All electrical system
I
I
I
I
I
I
I
I
I
I
I
I
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)*7
 
R
 
R
 
R
 
R
 
R
 
R
Tires (including spare tire)(with inflation pressure adjustment)
I
I
I
I
I
I
I
I
I
I
I
I
Hinges and catches
L
L
L
L
L
L
L
L
L
L
L
L


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten
L: Lubricate


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 7,500 km or 6 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 7,500 km or 6 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*3: If the vehicle is operated primarily under any of the following conditions, replace the engine oil at every 2,500 km or 3 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*4: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*5: If the vehicle is operated in very dusty or sandy areas, clean the air cleaner element at every 7,500 km or 6 months.
*6: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*7: If the vehicle is operated in very dusty or sandy areas, replace the cabin air filter at every 15,000 km or 12 months.

L3 Turbo engine

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

 

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

5

15

30

45

60

75

90

105

120

135

150

165

180
Engine valve clearance
Audibly inspect every 45,000 km or 3 years, if noisy, adjust
Drive belts*1
 
I
I
I
I
I
I
I
I
I
I
I
I
Spark plugs
 
I
I
I
I
R
I
I
I
I
R
I
I
Air cleaner element*2
 
C
C
R
C
C
R
C
C
R
C
C
R
Evaporative system (if installed)
 
 
 
 
I
 
 
 
I
 
 
 
I
Engine oil*3
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter*3
R
R
R
R
R
R
R
R
R
R
R
R
R
Cooling system
 
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type*4
Replace every 195,000 km or 11 years
Others
Replace at first 90,000 km or 4 years; after that, every 2 years
Fuel filter
Replace every 120,000 km
Fuel lines and hoses
 
 
I
 
I
 
I
 
I
 
I
 
I
Battery electrolyte level and specific gravity
 
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
 
I
I
I
I
I
I
I
I
I
I
I
I
Brake fluid*5
 
 
R
 
R
 
R
 
R
 
R
 
R
Parking brake
 
I
I
I
I
I
I
I
I
I
I
I
I
Disc brakes
 
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
 
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
I
I
I
I
I
I
I
I
I
I
I
Manual transaxle oil
 
I
I
I
I
R
I
I
I
I
R
I
I
Front and rear suspension, ball joints and wheel bearing axial play
 
I
I
I
I
I
I
I
I
I
I
I
I
Drive shaft dust boots
 
I
I
I
I
I
I
I
I
I
I
I
I
Exhaust system and heat shields
 
I
I
I
I
I
I
I
I
I
I
I
I
Bolts and nuts on chassis and body
 
 
T
 
T
 
T
 
T
 
T
 
T
Hinges and catches
L
L
L
L
L
L
L
L
L
L
L
L
L
All electrical system
 
I
I
I
I
I
I
I
I
I
I
I
I
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)*6
 
 
R
 
R
 
R
 
R
 
R
 
R
Tires (including spare tire) (with inflation pressure adjustment)
 
I
I
I
I
I
I
I
I
I
I
I
I
Flat tire repair kit (if installed)*7
Inspect annually


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
L: Lubricate
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 7,500 km or 6 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: If the vehicle is operated in very dusty or sandy areas, clean the air cleaner element at every 7,500 km or 6 months.
*3: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 7,500 km or 6 months.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*4: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*5: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*6: If the vehicle is operated in very dusty or sandy areas, replace the cabin air filter at every 15,000 km or 12 months.
*7: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.


Scheduled Maintenance Table for Hong Kong

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160
Engine valve clearance (except SKYACTIV-G)
Audibly inspect every 120,000 km, if noisy, adjust
Drive belts*1
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Fuel filter
Replace every 160,000 km
Spark plugs*2
Iridium type
Replace every 120,000 km
except Iridium type
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Evaporative system (if installed)
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Engine oil*3
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter*3
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type*4
 
 
 
 
 
 
 
 
 
R
 
 
 
 
 
 
Others
Replace every 2 years
Air cleaner element*5
 
C
 
C
 
R
 
C
 
C
 
R
 
C
 
C
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Battery electrolyte level and specific gravity*6
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake lines, hoses and connections
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake fluid*7
I
I
I
R
I
I
I
R
I
I
I
R
I
I
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Front and rear suspension, ball joints and wheel bearing axial play
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Drive shaft dust boots
 
 
 
I
 
 
 
I
 
 
 
I
 
 
 
I
Exhaust system and heat shields
Inspect every 80,000 km
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
T
 
T
 
T
 
T
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)
 
R
 
R
 
R
 
R
 
R
 
R
 
R
 
R
Tires (including spare tire)(with inflation pressure adjustment)
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Tire rotation
Rotate every 10,000 km
Flat tire repair kit (if installed)*8
Inspect annually


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation. Don't tamper with them.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: Verify the spark plug type from the spark plug itself. Refer to specifications.
(See SPARK PLUG INSPECTION [MZR 2.0, MZR 2.5].)
(See SPARK PLUG INSPECTION [MZR 2.3 DISI Turbo].)
(See SPARK PLUG INSPECTION [SKYACTIV-G 2.0].)
(See SPARK PLUG INSPECTION [MZR 1.5, MZR 1.6].)
*3: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*4: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*5: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*6: If the vehicle is operated in extremely heat and extremely cold areas, inspect the battery electrolyte level and specific gravity at every 10,000 km (6,250 miles) or 6 months.
*7: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*8: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.


Scheduled Maintenance Table for Except Europe (L.H.D. U.K.), Australia, Israel, Russia/Belarus/Azerbaijan, Hong Kong

except L3 Turbo engine

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

×1000 miles

6.25

12.5

18.75

25

31.25

37.5

43.75

50

56.25

62.5

68.75

75

81.25

87.5

93.75

100
GASOLINE ENGINE
Engine valve clearance
Except below countries
Audibly inspect every 120,000 km (75,000 miles), if noisy, adjust
Georgia/Armenia/Iraq
Audibly inspect every 40,000 km (25,000 miles) or 3 years, if noisy, adjust
Drive belts*1
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Fuel filter
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Spark plugs*2*3
Iridium type
Replace every 120,000 km (75,000 miles)
Except Iridium type
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Evaporative system (if installed)
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
DIESEL ENGINE
Engine valve clearance (for R2 engine)
 
 
 
 
 
 
 
 
 
 
 
I
 
 
 
 
Engine timing belt (for Y6 engine)*4
Replace every 200,000 km (125,000 miles) or 10 years
Drive belts*1
R2 engine
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Y6 engine
Inspect every 10,000 km (6,250 miles) or 6 months
Replace every 200,000 km (125,000 miles) or 10 years
Fuel filter
 
 
 
R
 
 
 
R
 
 
 
R
 
 
 
R
Fuel injection system (for R2 engine)*5
 
I
 
 
 
I
 
 
 
 
 
I
 
 
 
 
Fuel system (Drain water)
 
D
 
 
 
D
 
 
 
D
 
 
 
D
 
 
GASOLINE AND DIESEL ENGINE
Engine oil*6*7
Except below countries
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Georgia/Armenia/Cambodia
Replace every 5,000 km (3,125 miles) or 6 months
Engine oil filter*6
Except below countries
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Georgia/Armenia/Cambodia
Replace every 10,000 km (6,250 miles) or 12 months
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type*8
 
 
 
 
 
 
 
 
 
R
 
 
 
 
 
 
Others
Replace every 2 years
Air cleaner element*9
Except below countries
 
C
 
C
 
R
 
C
 
C
 
R
 
C
 
C
Georgia/Armenia
 
C
 
R
 
C
 
R
 
C
 
R
 
C
 
R
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Battery electrolyte level and specific gravity*10
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake lines, hoses and connections
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake fluid*11
I
I
I
R
I
I
I
R
I
I
I
R
I
I
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Manual transaxle oil
Y6 engine
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Except Y6 engine
 
 
 
 
 
 
 
 
 
R
 
 
 
 
 
 
Front and rear suspension, ball joints and wheel bearing axial play
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Drive shaft dust boots
 
 
 
I
 
 
 
I
 
 
 
I
 
 
 
I
Exhaust system and heat shields
Inspect every 80,000 km (50,000 miles)
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
T
 
T
 
T
 
T
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)
 
R
 
R
 
R
 
R
 
R
 
R
 
R
 
R
Tires (including spare tire)(with inflation pressure adjustment)
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Tire rotation
Rotate every 10,000 km (6,250 miles)
Flat tire repair kit (if installed)*12
Inspect annually


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
D: Drain
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: Verify the spark plug type from the spark plug itself. Refer to specifications.
(See SPARK PLUG INSPECTION [MZR 2.0, MZR 2.5].)
(See SPARK PLUG INSPECTION [MZR 2.3 DISI Turbo].)
(See SPARK PLUG INSPECTION [MZR 2.0 DISI i-stop].)
(See SPARK PLUG INSPECTION [SKYACTIV-G 2.0].)
(See SPARK PLUG INSPECTION [MZR 1.5, MZR 1.6].)
*3: In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 12 months before replacing them at the said interval.
Georgia, Armenia, Vietnam, Iraq, Cambodia.
*4: Replacement of the timing belt is required at every 200,000 km (125,000 miles) or 10 years. Failure to replace the timing belt may result in damage to the engine.
*5: Implement the fuel injection amount correction.
*6: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*7: For R2 engine, reset the engine oil data after replacing the engine oil.
*8: Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*9: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air filter more often than the recommended intervals.
*10: If the vehicle is operated in extremely heat and extremely cold areas, inspect the battery electrolyte level and specific gravity at every 10,000 km (6,250 miles) or 6 months.
*11: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*12: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.

L3 Turbo engine

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

×1000 miles

6.25

12.5

18.75

25

31.25

37.5

43.75

50

56.25

62.5

68.75

75

81.25

87.5

93.75

100
Engine valve clearance
Audibly inspect every 120,000 km (75,000 miles), if noisy, adjust
Spark plugs
Replace every 100,000 km (62,500 miles)
Evaporative system (if installed)
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Drive belts *1
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Engine oil *2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter *2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Cooling system
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Engine coolant
FL22 type *3
 
 
 
 
 
 
 
 
 
R
 
 
 
 
 
 
Others
Replace every 2 years
Fuel filter
Replace every 60,000 km (37,500 miles)
Fuel lines and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Air cleaner element *4
 
C
 
C
 
R
 
C
 
C
 
R
 
C
 
C
Battery electrolyte level and specific gravity *5
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake lines, hoses and connections
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Brake fluid *6
I
I
I
R
I
I
I
R
I
I
I
R
I
I
I
R
Parking brake
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power brake unit (Brake booster) and hoses
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Power steering fluid, lines, hoses and connections
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Manual transaxle oil
 
 
 
 
 
 
 
 
 
R
 
 
 
 
 
 
Front and rear suspension, ball joints and wheel bearing axial play
 
I
 
I
 
I
 
I
 
I
 
I
 
I
 
I
Drive shaft dust boots
 
 
 
I
 
 
 
I
 
 
 
I
 
 
 
I
Exhaust system and heat shields
Inspect every 80,000 km (50,000 miles)
Bolts and nuts on chassis and body
 
T
 
T
 
T
 
T
 
T
 
T
 
T
 
T
Body condition (for rust, corrosion and perforation)
Inspect annually
Cabin air filter (if installed)
 
R
 
R
 
R
 
R
 
R
 
R
 
R
 
R
Tires (including spare tire) (with inflation pressure adjustment)
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Tire rotation
Rotate every 10,000 km (6,250 miles)
Flat tire repair kit (if installed) *7
Inspect annually


Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten


Remarks

Emission control and related systems
•  The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.
•  After the prescribed period, continue to follow the described maintenance at the recommended intervals.
•  Refer below for a description of items marked* in the maintenance chart.
*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*2: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.
a.  Driving in dusty conditions
b.  Extended periods of idling or low speed operation
c.  Driving for long period in cold temperatures or driving regularly at short distance only
d.  Driving in extremely hot conditions
e.  Driving in mountainous conditions continually
*3: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
*4: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.
*5: If the vehicle is operated in extremely heat and extremely cold areas, inspect the battery electrolyte level and specific gravity at every 10,000 km (6,250 miles) or 6 months.
*6: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
*7: Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the tire repair fluid bottle with new one before the expiration date.


Scheduled Maintenance Service (Specific Work Required)

•  The specific work required for each maintenance item is listed in the following table. (Please refer to the section applicable to the model serviced.)

Maintenance Item

Specific Work Required
ENGINE
Engine valve clearance
Inspect engine valve clearance.
Engine timing belt
Replace engine timing belt.
Engine timing belt auto tensioner
Replace engine timing belt auto tensioner.
Drive belts
Inspect for wear, cracks, fraying and tension.
Engine oil
Replace engine oil and inspect for leakage.
Engine oil filter
Replace engine oil filter and inspect for leakage.
COOLING SYSTEM
Cooling system (Including coolant level adjustment)
Check engine coolant level and quality, and inspect for leakage.
Radiator cap
Inspect radiator cap.
Engine coolant
Replace engine coolant.
FUEL SYSTEM
Idle speed
Check engine idle rpm.
Idle mixture
Inspect the CO and HC concentrations (see W/M).
Choke system
Check system operation.
Air cleaner element
Inspect dirt, oil and damage.
Clean air cleaner element (by blowing air).
Replace air cleaner element.
Fuel filter
Replace fuel filter.
Fuel injection pump inlet filter
Clean fuel injection pump inlet filter.
Fuel lines and hoses
Fuel lines, hoses and connections
Inspect for cracks, leakage and loose connection.
Fuel injection system
Update to injection amount correction with WDS (see W/M).
Update to injection amount correction with M-MDS (see W/M).
Fuel system (Drain water)
Drain water in fuel system.
Urea solution (AdBlue) for SCR system
Top up or drain and fill up with urea solution (AdBlue).
Diesel particulate filter
Replace diesel particulate filter.
Fuel additive for diesel particulate filter
Fill up fuel additive.
IGNITION SYSTEM
Initial ignition timing
Check initial ignition timing.
Spark plugs
Inspect for wear, damage, carbon, plug gap and high-tension lead condition.
Replace spark plugs.
Ignition cables condition/security
Inspect for damage, condition and connection.
EMISSION CONTROL SYSTEM
Evaporative system
Evaporative emission control system
Check system operation (see W/M), vapor lines, vacuum fitting hoses and connection.
Crankcase emission control system
Check system operation (see W/M), PCV valve, blow-by lines, vacuum fitting hoses and connection.
E.G.R system
Check system operation (see W/M), vacuum fitting hoses and connection.
MZR-CD (RF turbo) engine: Update to MAF correction for E.G.R control with WDS (see W/M).
MZR-CD (RF turbo) engine: Update to MAF correction for E.G.R control with M-MDS (see W/M).
Air intake system
Update to MAF correction (see W/M).
Throttle positioner system
Check the diaphragm and system operation, vacuum fitting hoses and connection.
Dash pot
Check system operation.
ELECTRICAL SYSTEM
Battery electrolyte level and specific gravity
Check battery electrolyte level and specific gravity.
Battery condition
Check battery for corroded or loose connections and cracks.
Battery
Check battery for leakage and corrosion.
All electrical system
Lighting system and windshield wipers and washer
Check function of lighting system, windshield wiper (including wiper blade condition), washer and power windows.
Head light alignment
Check head light alignment.
CHASSIS AND BODY
Brake and clutch pedals
Brake pedals
Check pedal height and free play.
Brake fluid
Check brake fluid level and for leakage.
Replace brake fluid.
Clutch fluid
Check Clutch fluid level and for leakage.
Brake lines, hoses and connections
Inspect for cracks, damage, chafing, corrosion, scars, swelling and fluid leakage.
Parking brake
Check parking lever stroke.
Power brake unit and hoses
Power brake unit (Brake booster) and hoses
Check vacuum lines, connections, and check valve for improper attachment, air tightness, cracks chafing and deterioration.
Disc brakes
Inspect caliper for correct operation and fluid leakage, brake pads for wear. Check disc plate condition and thickness. Test for judder and noise.
Drum brakes
Inspect brake drum for wear and scratches: brake lining for wear, peeling and cracks; wheel cylinder for fluid leakage. Test for judder and noise.
Manual steering gear oil
Check manual gear oil level.
Power steering fluid, lines, hoses and connections
Power steering fluid and lines
Check power steering fluid level and lines for improper attachment, leakage, cracks, damage, loose connections, chafing and deterioration.
Steering operation and gear housing
Steering linkages tie rod ends and arms
Steering operation and linkages
Check that the steering wheel has the specified play. Be sure to check for changes, such as excessive play, hard steering or strange noises. Check gear housing and boots for looseness, damage and grease/gear oil leakage. Check ball joint, dust cover and other components for looseness, wear, damage and grease leakage.
Front and rear suspension and ball joints
Front suspension ball joints
Front and rear suspension, ball joints and wheel bearing axial play
Inspect for grease leakage, crack, damage and looseness.
 
Inspect for grease leakage, crack, damage, looseness and wheel bearing play/noise.
Wheel bearing axial play
Inspect for wheel bearing play/noise.
Manual transmission/transaxle oil
Check manual transmission/transaxle oil level and for leakage.
Replace manual transmission/transaxle oil.
Automatic transmission/transaxle fluid level
Check automatic transmission/transaxle fluid level.
Automatic transmission/transaxle fluid
Replace automatic transmission/transaxle fluid.
Front and rear differential oil
Front differential oil
Front axle oil
Rear differential oil
Rear axle oil
Check front and rear differential oil level and inspect for leakage.
Replace front and rear differential oil.
Transfer oil
Check transfer oil level inspect for leakage.
Replace transfer oil
Front and rear wheel bearing grease
Front wheel bearing grease
Remove wheel bearing and replace wheel bearing grease.
Wheel bearing axial play
Wheel bearing axial play (rear) and lateral play (front)
Inspect wheel bearing play and noise.
Propeller shaft joints
Front propeller shaft joints
Rear propeller shaft joints
Lubricate propeller shaft joints.
Drive shaft dust boots
Inspect for grease leakage, crack, damage and looseness.
Wheel nuts
Tighten wheel nuts.
Bolts and nuts on chassis and body
Bolts and nuts on seats
Tighten bolts and nuts fastening suspension components, members and seat frames.
Body condition (for rust, corrosion and perforation)
Inspect body surface for paint damage, rust, corrosion and perforation.
Exhaust system and heat shields
Exhaust pipe connections
Inspect for damage, corrosion, looseness of connections and gas leakage.
Tire rotation
Rotate tires.
Tires (Including spare tire) (with inflation pressure adjustment)
Check air pressure and inspect tires for tread wear, damage, cracks; and wheels for damage and corrosion.
Flat tire repair kit
Check tire repair fluid expiration date.
Hinges and catches
Lubricate hinges and catches of doors, trunk lid and hood.
Underside of vehicle
Inspect underside of vehicle (floor pans, frames, fuel lines, around exhaust system etc.) for damage and corrosion.
Road test
Check brake operation/clutch operation/steering control/operation of meters and gauges/squeaks, rattles, or unusual noises/engine general performance/ emergency locking retractors.
Diagnostic trouble code by WDS
Diagnostic trouble code by M-MDS
Check diagnostic trouble code with WDS (see W/M).
Check diagnostic trouble code with M-MDS (see W/M).
M-MDS check of Vehicle Management and Safety Systems
Check the items below with M-MDS (see W/M).
1.  Retrieve All CMDTCs
2.  PCM function test (except Tribute and diesel engine models)
3.  PCM Input/Output Data Monitor (except Tribute and diesel engine models)
4.  Adviser Comment (except Tribute and diesel engine models)
AIR CONDITIONER SYSTEM
Cabin air filter
Replace cabin air filter.