i-stop INDICATOR LIGHT (GREEN)/ i-stop WARNING LIGHT (AMBER) LIST [MZR 2.0 DISI i-stop]

Classification		Operation conditions	Vehicle status	i-stop indicator/warning display			Other	Buzzer
				Illuminates	Flashes		Illuminates
				Illuminates	0.5 s	0.25 s	Illuminates
Directly after vehicle stop	IS enable condition from vehicle	IS conditions not met	IS inhibited (idle)	—	—	—	—	—
Directly after vehicle stop	IS enable condition from vehicle	IS conditions met	IS	Green	—	—	—	—
i-stop (engine-stop)	IS permit status		IS continues	Green	—	—	—	—
	IR command via driver operation	Clutch pedal depressed (neutral)	IR	—	—	—	—	—
	Switch to unsafe status via driver operation	In gear	IS continues	—	—	Green	—	—
		Door opened	IS continues	—	—	Green	—	0.25 s intervals
		Seat belt unfastened and door opened	Engine stall	Amber ^*1	—	Green ^*1	Indicator/warning all illuminated	0.25 s intervals
		Bonnet opened	Engine stall	Amber	—	—	Indicator/warning all illuminated	—
	IR via vehicle command	• Battery command • Climate control command • Defroster switch ON • Front/rear window thermal filaments ON	IR	—	Green ^*2	—	—	—
		• Vehicle moves on road incline • Power brake unit vacuum reduced • Battery life	IR	—	—	—	—	—
		Advanced key outside of vehicle	IR	—	—	—	—	Keyless control module Normal buzzer
	IR error	Engine restart (permitted 3 times)	IS continues	Green	—	—	—	—
	IR not possible	Engine restart (failure 3 times)	Engine stall	Amber	—	—	—	—
i-stop OFF switch operation	i-stop OFF operation	i-stop OFF switch ON (long press, 0.5 s or more)	IS not possible	Amber	—	—	—	Beep 1 time
i-stop OFF switch operation	i-stop recover operation	i-stop OFF switch OFF (long press, 0.5 s or more)	IS permitted	Amber^*3	—	—	—	Beep 1 time
Malfunction	System malfunction		IS not permitted (idle)	—	Amber	—	—	—

*1 :The IS illuminates green continuously from the point in time the seat belt is unfastened.If the door is opened thereafter, the illumination switches to amber (and beeper sounds 3 times) after the green illumination flashes (and beeper sounds 3 times), and the engine then stalls.

*2 :Flashes 3 times or more in a 2.5 s period from the IR command, and turns off during IR.(If user initiates IR within 2.5 s of IR command, flashing continues) In addition, performs IR after 3 s have elapsed since flashing started.