OIL CONTROL VALVE (OCV) REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop]
id011037801300
1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
4. Disconnect the wiring harness.
5. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
6. Remove the ventilation hose.
7. Remove the dipstick.
8. Remove the cylinder head cover. (See TIMING CHAIN REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
9. Remove in the order indicated in the table.
10. Install in the reverse order of removal.
am3uuw00002365
|
1
|
OCV installation bolt
|
2
|
OCV
|