THERMOSTAT INSPECTION [MZR 2.3 DISI Turbo]

id011209801300

1.  Remove the thermostat. (See THERMOSTAT REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

2.  Visually check that the thermostat valve is closed.

3.  Place the thermostat in water.

Warning

•  During inspection, the thermostat and water are extremely hot and can cause severe burns. Do not touch the thermostat and water.

4.  Heat the water and check the following.

•  Opening temperature and valve lift

―  If there is a malfunction, replace the thermostat. (See THERMOSTAT REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)