BEFORE SERVICE PRECAUTION [MZR 2.3 DISI Turbo]

id0114d9802000

Warning

•  Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

•  Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the following “Fuel Line Safety Procedure”.

•  A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before performing work on the fuel system, discharge static electricity by touching the vehicle body.

Fuel Line Safety Procedure

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

3.  Remove the fuel-filler cap and release the pressure in the fuel tank.

4.  Remove the fuel pump relay.

am3zzw00012075

5.  Disconnect the high pressure fuel pump connector.

6.  Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

7.  Start the engine.

8.  After the engine stalls, crank the engine several times.

9.  Switch the ignition to off.

10.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

11.  Install the fuel pump relay.

12.  Connect the high pressure fuel pump connector.