QUICK RELEASE (FUEL SYSTEM) CONNECTOR [SKYACTIV-G 2.0]

id0114z5003800

Purpose, Function

Construction

•  The following types of the quick release connectors are used.

am3uun00002122

Type A

•  An SST is used with this type.

am3uun00002123

•  Consists of a retainer and O-ring. The quick release connector is integrated with the fuel hose and therefore cannot be disassembled.

•  To connect the quick release connector properly, push it into the fuel pipe until a locking click sound is heard.

•  New quick release connectors are fitted with a checker tab that prevent improper installation. This checker tab cannot normally be removed. When the quick release connector is properly connected to the fuel pipe, the lock is released and the checker tab comes off. Due to this, it can be verified that the quick release connector is completely connected.

Type B

•  An SST is not used with this type.

•  Mainly consists of a retainer and O-ring. The quick release connector is integrated with the fuel hose and therefore cannot be disassembled.

•  When the quick release connector is connected, the fuel pipe projection is locked at the clamp lock point. To release the quick connector lock for each type, follow the procedure in the order shown in each figure.

am3uun00002124

Type C

•  An SST is not used with this type.

•  Mainly consists of a retainer and O-ring. The quick release connector is integrated with the fuel hose and therefore cannot be disassembled.

•  When the quick release connector is connected, the fuel pipe projection is locked at the clamp lock point. To procedure in the order shown in each figure.

am3uun00002125