FUEL PUMP CONTROL MODULE INSPECTION [SKYACTIV-G 2.0]

id0114z5175100

1.  Perform the KOEO self-test. (See KOEO/KOER SELF TEST [SKYACTIV-G 2.0].)

2.  Verify that a fuel pump control module related DTC is detected. (See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0].)

•  If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SKYACTIV-G 2.0].)

•  If a DTC is not detected, go to the next step.

3.  Inspect the following:

•  Fuel pump control module damage

•  Fuel pump control module connector damage or corrosion

―  If there is any malfunction, repair or replace the malfunctioning part.

―  If there is no malfunction, replace the fuel control module. (See FUEL PUMP CONTROL MODULE REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)