IGNITION COIL INSPECTION [MZR 2.0, MZR 2.5]

id011805800300

Ignition Coil Inspection

1.  Perform the spark test and identify the malfunctioning cylinder. (See ENGINE CONTROL SYSTEM OPERATION INSPECTION [MZR 2.0, MZR 2.5].)

2.  Replace the ignition coil of the malfunctioning cylinder with that of a normal cylinder, and perform the spark test again. (See ENGINE CONTROL SYSTEM OPERATION INSPECTION [MZR 2.0, MZR 2.5].)

•  If the spark is not normal due to a malfunctioning ignition coil, replace that ignition coil.

•  It is unlikely that all four ignition coils fail to operate properly. To prevent replacing a normal component, perform the above procedure, identify the malfunctioning ignition coil, and replace it.