SPARK PLUG REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo]


id011806800400

Caution
•  If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

3.  Remove the charge air cooler. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

4.  Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

5.  Remove the spark plugs using a plug-wrench.

6.  Install in the reverse order of removal.

Tightening torque
10—14 N·m {102—142 kgf·cm, 89—123 in·lbf}