STARTER INTERLOCK SWITCH INSPECTION [MZ-CD 1.6]

id011924104200

Vehicle With Starter Interlock Switch

Caution

•  Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)

3.  Disconnect the starter interlock switch connector.

4.  Verify that the continuity is as indicated in the table using a tester.

am3zzw00012465

am3zzw00012466

•  If the continuity is not as indicated in the table, replace the starter interlock switch.

(See CLUTCH PEDAL REMOVAL/INSTALLATION.)