STARTER INTERLOCK SWITCH INSPECTION [MZR-CD 2.2]

id0119f5104200

Caution

•  Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.  Disconnect the starter interlock switch connector.

3.  Verify that the continuity is as indicated in the table using a tester.

am6zzw00002367

am6zzw00004416

•  If the continuity is not as indicated in the table, replace the starter interlock switch.

(See CLUTCH PEDAL REMOVAL/INSTALLATION.)