NEUTRAL SWITCH INSPECTION [MZR 1.5, MZR 1.6]

id014068800800

Continuity Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

3.  Disconnect the neutral switch connector. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R].)

4.  When the shift lever is in neutral and in a position other than neutral, verify that the continuity between neutral switch terminals A to B is according to the following table:

am3zzw00011556

•  If not as verified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R].)