CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [MZR 1.5, MZR 1.6]
id014068801600
Continuity Inspection
1. Verify that the CPP switch is installed properly. (See CLUTCH PEDAL REMOVAL/INSTALLATION.)
2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)
3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)
4. Disconnect the CPP switch connector.
5. Verify that the continuity between CPP switch terminals A and B when the clutch pedal is depressed and when it is released is according to the following table:
am3uuw00007212
|