MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [MZR 2.0, MZR 2.5]

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [MZR 2.0, MZR 2.5]

id0140e4800900

Voltage Inspection

1. Connect the M-MDS to the DLC-2.

am3zzw00011818

2. Switch the ignition to ON.

3. Verify that the MAP sensor output voltage (PID: MAP) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [MZR 2.0, MZR 2.5].) (See PCM INSPECTION [MZR 2.0, MZR 2.5].)

• If not as specified, replace the MAP sensor. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)