MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [MZR 2.3 DISI Turbo]

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [MZR 2.3 DISI Turbo]

id0140e5800900

Voltage Inspection

1. Connect the M-MDS to the DLC-2.

am3zzw00011780

2. Switch the ignition to ON.

3. Verify that the MAP sensor output voltage (PID: MAP) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [MZR 2.3 DISI Turbo].) (See PCM INSPECTION [MZR 2.3 DISI Turbo].)

• If not as specified, replace the MAP sensor/boost air temperature sensor. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/BOOST AIR TEMPERATURE SENSOR REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)