KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo]

id0140e5802900

Caution

•  Be careful not to impact the sensor.

•  Verify that there is no debris between the sensor and the cylinder block before installing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

3.  Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

4.  Disconnect the KS connector.

5.  Remove the KS.

am3zzw00011796

6.  Install in the reverse order of removal.