FUEL INJECTOR CODE PROGRAM [MZR-CD 2.2]

id0140f2444900

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the FUEL INJECTOR CODE PROGRAM.

1.  Connect the M-MDS to the DLC-2.

am3zzw00011582

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

1.  Select the “Module Programming”.

3.  Then, select items from the screen menu in the following order.

1.  Select the “Programmable Parameters”.

2.  Select the “Injector Correction Factors”.

4.  Select the “Program” and perform procedures according to directions on the M-MDS screen.

5.  Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

•  If a DTC(s) is detected, perform the applicable DTC inspection.