NEUTRAL SWITCH INSPECTION [MZR-CD 2.2]

id0140f2800800

Note

•  Perform the following test only when directed.

Continuity Inspection

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.  Disconnect the neutral switch connector. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [A26M-R].)

3.  When the shift lever is in neutral and in a position other than neutral, verify that the continuity between neutral switch terminals A to B is according to the following table:

am3zzw00011597

•  If not as verified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [A26M-R].)