PCM CONFIGURATION [SKYACTIV-G 2.0]

id0140f4802600

Note

•  When replacing the starter and the PCM simultaneously, perform the PCM configuration first.

1.  Connect the M-MDS (IDS) to DLC-2.

am3zzw00012685

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS (IDS).

(1)  “Module Programming”

3.  Select “Programmable Module Installation”.

4.  Select menu in the “PCM”.

5.  Perform the configuration according to the directions on the screen.

6.  Retrieve DTCs by the M-MDS (IDS), then verify that there is no DTC present.

•  If a DTC(s) is detected, perform the applicable DTC inspection. (See DTC TABLE [SKYACTIV-G 2.0].)