NEUTRAL SWITCH INSPECTION [MZR 2.0 DISI i-stop]

id0140j1800800

Neutral Switch No.1

Continuity inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

3.  Disconnect the neutral switch No.1 connector. (See NEUTRAL SWITCH NO.1 REMOVAL/INSTALLATION [G66M-R (MZR 2.0 DISI i-stop)].)

4.  When the shift lever is in neutral, verify that the continuity between neutral switch No.1 terminals A and B is according to the following table:

am3zzw00011874

•  If not as verified, replace the neutral switch No.1. (See NEUTRAL SWITCH NO.1 REMOVAL/INSTALLATION [G66M-R (MZR 2.0 DISI i-stop)].)

Neutral Switch No.2

Continuity inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

3.  Disconnect the neutral switch No.2 connector. (See NEUTRAL SWITCH NO.2 REMOVAL/INSTALLATION [G66M-R (MZR 2.0 DISI i-stop)].)

4.  When the shift lever is in neutral, verify that the continuity between neutral switch No.2 terminals A and B is according to the following table:

am3zzw00011875

•  If not as verified, replace the neutral switch No.2. (See NEUTRAL SWITCH NO.2 REMOVAL/INSTALLATION [G66M-R (MZR 2.0 DISI i-stop)].)