MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop]
id0140j1804300
1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
3. Disconnect the MAP sensor connector.
4. Remove the MAP sensor.
am3zzw00011889
|
5. Install in the reverse order of removal.