BRAKES TECHNICAL DATA

id045000800100

Item

Specification

Brake fluid type

European (L.H.D. U.K.) specs.: SAE J1703 or FMVSS116 DOT-3 or DOT-4

Australian, General (L.H.D. R.H.D.) specs.: SAE J1703 or FMVSS116 DOT-3

Brake pedal height (reference value)

L.H.D. (MZR 1.6, MZR 2.0, MZR 2.0 DISI i-stop, MZ-CD 1.6, MZR-CD 2.2): 125.0 mm {4.921 in}

L.H.D. (MZR 2.3 DISI Turbo): 128.9 mm {5.075 in}

R.H.D.: 128.9 mm {5.075 in}

Brake pedal play

4.0—8.4 mm {0.16—0.33 in}

Brake pedal-to-floor clearance (Brake pedal when depressed at 147 N {15.0 kgf, 33.0 lbf})

L.H.D.: 83.5 mm {3.29 in} or more

R.H.D.: 87.4 mm {3.44 in} or more

Vacuum pump vacuum specification (In 10 s) (MZR-CD 2.2)

Engine speed 725 rpm: 66.6 kPa {500 mmHg, 19.7 inHg} or more

Vacuum pump maximum vacuum (MZR-CD 2.2)

Engine speed 725 rpm: 93.3 kPa {700 mmHg, 27.6 inHg} or more

Front disc plate runout limit

0.05 mm {0.002 in}

Minimum front disc plate thickness

23 mm {0.91 in}

Minimum front disc plate thickness after machining using a brake lathe on-vehicle

23.8 mm {0.937 in}

Minimum front disc pad thickness

2.0 mm {0.079 in} min.

Rear disc plate runout limit

0.05 mm {0.002 in}

Minimum read disc plate thickness

9 mm {0.35 in}

Minimum rear disc plate thickness after machining using a brake lathe on-vehicle

9.8 mm {0.39 in}

Minimum rear disc pat thickness

2.0 mm {0.079 in} min.

Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}

2—6 notches

Item	Specification
Brake fluid type	European (L.H.D. U.K.) specs.: SAE J1703 or FMVSS116 DOT-3 or DOT-4 Australian, General (L.H.D. R.H.D.) specs.: SAE J1703 or FMVSS116 DOT-3
Brake pedal height (reference value)	L.H.D. (MZR 1.6, MZR 2.0, MZR 2.0 DISI i-stop, MZ-CD 1.6, MZR-CD 2.2): 125.0 mm {4.921 in} L.H.D. (MZR 2.3 DISI Turbo): 128.9 mm {5.075 in} R.H.D.: 128.9 mm {5.075 in}
Brake pedal play	4.0—8.4 mm {0.16—0.33 in}
Brake pedal-to-floor clearance (Brake pedal when depressed at 147 N {15.0 kgf, 33.0 lbf})	L.H.D.: 83.5 mm {3.29 in} or more R.H.D.: 87.4 mm {3.44 in} or more
Vacuum pump vacuum specification (In 10 s) (MZR-CD 2.2)	Engine speed 725 rpm: 66.6 kPa {500 mmHg, 19.7 inHg} or more
Vacuum pump maximum vacuum (MZR-CD 2.2)	Engine speed 725 rpm: 93.3 kPa {700 mmHg, 27.6 inHg} or more
Front disc plate runout limit	0.05 mm {0.002 in}
Minimum front disc plate thickness	23 mm {0.91 in}
Minimum front disc plate thickness after machining using a brake lathe on-vehicle	23.8 mm {0.937 in}
Minimum front disc pad thickness	2.0 mm {0.079 in} min.
Rear disc plate runout limit	0.05 mm {0.002 in}
Minimum read disc plate thickness	9 mm {0.35 in}
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle	9.8 mm {0.39 in}
Minimum rear disc pat thickness	2.0 mm {0.079 in} min.
Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}	2—6 notches

Master cylinder fluid pressure

Vacuum amount at 0 kPa {0 mmHg, 0 inHg}
Pedal force	Fluid pressure
200 N {20.4 kgf, 45.0 lbt}	500 kPa {5.10 kgf/cm², 72.5 psi} or more

Master cylinder fluid pressure (MZR 1.5, MZR 1.6, MZR 2.0, MZR 2.0 DISI i-stop, SKYACTIV-G 2.0, MZR 2.5, MZ-CD 1.6, MZR-CD 2.2)

Vacuum amount at 66.7 kPa {500 mmHg, 19.7 inHg}
Pedal force	Fluid pressure
200 N {20.4 kgf, 45.0 lbt}	6,500 kPa {66.28 kgf/cm², 942.7 psi} or more

Master cylinder fluid pressure (MZR 2.3 DISI Turbo)

Vacuum amount at 66.7 kPa {500 mmHg, 19.7 inHg}
Pedal force	Fluid pressure
200 N {20.4 kgf, 45.0 lbt}	7,000 kPa {71.38 kgf/cm², 1,015 psi} or more

Vacuum pump vacuum specification (reference value) (SKYACTIV-G 2.0)

Measurement condition		Specification
Engine speed	Change in vacuum amount	Period of time change in vacuum amount condition met
While idling (520—700 rpm (reference value))	From 60 kPa {450 mmHg, 18 inHg} to 67 kPa {503 mmHg, 20 inHg}	8 s or less

Vacuum pump maximum vacuum specification (reference value) (SKYACTIV-G 2.0)

Measurement condition	Specification
While idling (no time designation)	93.3 kPa {700 mmHg, 27.6 inHg} or more