FREQUENT SHIFTING [FW6A-EL]


id050315101300

TROUBLESHOOTING ITEM

Frequent shifting

DESCRIPTION
•  Downshifting occurs suddenly even when accelerator pedal is depressed slightly in D position.
POSSIBLE CAUSE
1.  Signal malfunction
―  APP sensor malfunction
2.  Poor GND
3.  Low-G (XY) sensor (built into SAS control module) malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION

1
INSPECT SIGNAL PARTS FOR MALFUNCTION
•  Inspect the value at the following PCM PID using the M-MDS.
―  APP (APP sensor)
•  Is there any malfunction?
Yes
Repair or replace any malfunctioning parts according to the inspection result.
No
Go to the next step.
2
VERIFY IF MALFUNCTION CAUSE IS TCM GND OR LOW-G (XY) SENSOR
•  Switch the ignition to off.
•  Disconnect the TCM connector.
•  Visually inspect for pin deformity, open circuit, or wiring harness non-insulation between TCM terminal 1B and body GND.
•  Is there any malfunction?
Yes
Repair or replace any malfunctioning parts according to the inspection result.
No
Replace the SAS control module.