MAGNETIC CLUTCH ADJUSTMENT [MANUAL AIR CONDITIONER]


id0740a2800500


Except MZR-CD 2.2

1.  Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.

MZR 1.6

am3zzw00011041

MZR 2.0

am3zzw00011042

MZ-CD 1.6

am3zzw00011043

2.  Verify that the clearance.

•  If not within the specification, remove the pressure plate and adjust the clearance by changing the shim (0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.
Clearance
0.35—0.65 mm {0.014—0.025 in} (MZR 2.0, MZ-CD 1.6)
0.3—0.5 mm {0.012—0.019 in} (MZR 1.6)
am6xuw00001019


MZR-CD 2.2

1.  Set the A/C compressor on a level block.

am3zzw00011044

2.  Turn on the magnetic clutch by connecting the battery positive voltage to the magnetic clutch connector and ground to the A/C compressor body.

3.  Fix a dial gauge on a magnetic base and sent the measuring probe onto point A on the pressure plate surface.

am6zzw00003546

4.  Turn off the magnetic clutch by disconnecting the ground from the A/C compressor body, then measure the dial gauge readings.

5.  Measure the clearance for points B and C on the pressure plate surface by repeating the above Step 2 through 4.

6.  Verify that the clearance.

•  If not within the specification, remove the pressure plate and adjust the clearance by changing the shim (0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.
am3zzw00012003
Magnetic clutch clearance
0.3—0.5 mm {0.012—0.019 in}