DTC U1A4B:54 [REAR VEHICLE MONITORING SYSTEM]


id0902z2668600

DESCRIPTION

Radar aiming is not performed or radar sensor axis is deviated (Rear vehicle monitoring control module (LH))

DETECTION CONDITION
•  Rear vehicle monitoring control module (LH) radar aiming is out of range for 1 s or more.
POSSIBLE CAUSE
•  Rear vehicle monitoring control module (LH) radar aiming is not performed.
•  Rear vehicle monitoring control module (LH) radar sensor axis is deviated.
•  Rear vehicle monitoring control module (LH) malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION

1
PERFORM REAR VEHICLE MONITORING CONTROL MODULE (LH) RADAR AIMING
•  Perform the rear vehicle monitoring radar aiming (LH).
•  Clear the DTC from rear vehicle monitoring control module using the M-MDS.
•  Switch the ignition to ON and wait for 1.5 s or more.
•  Perform the rear vehicle monitoring control module DTC inspection using the M-MDS.
•  Is the same DTC present?
Yes
Perform the rear vehicle monitoring radar aiming (LH) again, then go to the next step.
No
Go to Step 3.
2
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from rear vehicle monitoring control module using the M-MDS.
•  Switch the ignition to ON and wait for 1.5 s or more.
•  Perform the rear vehicle monitoring control module DTC inspection using the M-MDS.
•  Is the same DTC present?
Yes
Replace the rear vehicle monitoring control module (LH), then go to the next step.
No
Go to the next step.
3
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
No
DTC troubleshooting completed.