PID/DATA MONITOR TABLE [REAR VEHICLE MONITORING SYSTEM]


id0902z2960700

—: Not applicable

PID name

Unit/Status

Description

Inspection item

AIM_ANGL_L
°
Indicates the rear vehicle monitoring control module (LH) aiming angle.
Rear vehicle monitoring control module (LH)
AIM_ANGL_R
°
Indicates the rear vehicle monitoring control module (RH) aiming angle.
Rear vehicle monitoring control module (RH)
Buzzer
Off/On
•  Off: RVM buzzer is not operating.
•  On: RVM buzzer is operating.
Instrument cluster
INTNL_TMP_L
°C, °F
Indicates the rear vehicle monitoring control module (LH) internal temperature.
Rear vehicle monitoring control module (LH)
INTNL_TMP_R
°C, °F
Indicates the rear vehicle monitoring control module (RH) internal temperature.
Rear vehicle monitoring control module (RH)
MAIN_SW
Off/On
•  Off: RVM switch is not pressed.
•  On: RVM switch is pressed.
RVM switch
OP_BRT_L
Indicates the RVM warning indicator light (LH) brightness.
RVM warning indicator light (LH)
OP_BRT_R
Indicates the RVM warning indicator light (RH) brightness.
RVM warning indicator light (RH)
RVM_SYS_ST
Off/Passive_On/Active_On/Failure
•  Off: Rear vehicle monitoring system is stopped.
•  Passive_On: Rear vehicle monitoring system stand-by.
•  Active_On: Rear vehicle monitoring system is operating.
•  Failure: Rear vehicle monitoring system has a malfunction.
Rear vehicle monitoring system related parts
TURN_SW_L
Off/On
•  Off: Turn switch is not at LEFT position.
•  On: Turn switch is at LEFT position.
Turn switch
TURN_SW_R
Off/On
•  Off: Turn switch is not at RIGHT position.
•  On: Turn switch is at RIGHT position.
Turn switch
VPWR_L
V
Indicates the rear vehicle monitoring control module (LH) power supply voltage.
Rear vehicle monitoring control module (LH)
VPWR_R
V
Indicates the rear vehicle monitoring control module (RH) power supply voltage.
Rear vehicle monitoring control module (RH)
VSPD
KPH, MPH
Indicates the vehicle speed.
YAW_RATE
°/s
•  ―: Vehicle is stopped or driving straight.
•  0 °/s—changes to plus direction: Cornering to left
•  0 °/s—changes to minus direction: Cornering to right
SAS control module