PERSONALIZATION FEATURES SETTING PROCEDURE

id091400515500

Advanced Keyless Entry And Push Button Start System

1. Connect the M-MDS (IDS) to the DLC-2.

am3zzw00006174

2. After the vehicle is identified, select the following items from the initialization screen of the IDS.

1. Select “Module Programming”.

3. Then, select items from the screen menu in the following order.

1. Select “Programmable Parameters”.

2. Select “RKE”.

4. Select the item name, and then select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit

Advanced keyless function

The setting can be set either to operate the advance keyless entry system (Enable) or to not operate it (Disable).

Enabled

Disabled/ Enabled

Keyless control module

Advanced key battery low warning

The setting can be set either to operate the advanced key battery voltage low indication (Enable) or to not operate it (Disable).

Enabled

Disabled/ Enabled

Keyless control module

Auto Lock

The setting can be set either to operate the out-of-area (reception area) type auto lock function (Enable) or to not operate it (Disable).

Disabled

Disabled/ Enabled

Keyless control module

Auto relock timer (with AKE)

Auto re-lock operation timing can be changed.

30 s

30s/ 60s/ 90s

Keyless control module

Answer back buzzer volume

Volume adjustment of the answer back buzzer can be set.

8

Disabled/ 1-10

Keyless control module

Warning buzzer volume

Volume adjustment of the warning buzzer can be set.

8

1-10

Keyless control module

Super lock (with AKE)

The setting can be set to perform locking by either one or two lock operations, or it can be set to disable the function.

Two times to lock

Disabled/ Two times to lock/ One time to lock

Keyless control module

Unlocking doors interlocked with opening liftgate (for 5HB only)

The setting can be set either to unlock all the doors when the liftgate opener switch is pressed (Enable) or to not unlock them (Disable).

Disabled

Disabled/Enabled

Keyless control module

ACC auto off

The setting can be set either to automatically turn off the ACC power supply (Enable) or to not turn it off automatically (Disable).

Enabled

Disabled/Enabled

Keyless control module

Power off mode

The setting can be set to transit the power supply either to OFF (Direct) or to ACC (Stepwise) when the push button start is pressed to turn off the engine.

Direct

Direct/Stepwise

Keyless control module

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting content	Control unit
Advanced keyless function	The setting can be set either to operate the advance keyless entry system (Enable) or to not operate it (Disable).	Enabled	Disabled/ Enabled	Keyless control module
Advanced key battery low warning	The setting can be set either to operate the advanced key battery voltage low indication (Enable) or to not operate it (Disable).	Enabled	Disabled/ Enabled	Keyless control module
Auto Lock	The setting can be set either to operate the out-of-area (reception area) type auto lock function (Enable) or to not operate it (Disable).	Disabled	Disabled/ Enabled	Keyless control module
Auto relock timer (with AKE)	Auto re-lock operation timing can be changed.	30 s	30s/ 60s/ 90s	Keyless control module
Answer back buzzer volume	Volume adjustment of the answer back buzzer can be set.	8	Disabled/ 1-10	Keyless control module
Warning buzzer volume	Volume adjustment of the warning buzzer can be set.	8	1-10	Keyless control module
Super lock (with AKE)	The setting can be set to perform locking by either one or two lock operations, or it can be set to disable the function.	Two times to lock	Disabled/ Two times to lock/ One time to lock	Keyless control module
Unlocking doors interlocked with opening liftgate (for 5HB only)	The setting can be set either to unlock all the doors when the liftgate opener switch is pressed (Enable) or to not unlock them (Disable).	Disabled	Disabled/Enabled	Keyless control module
ACC auto off	The setting can be set either to automatically turn off the ACC power supply (Enable) or to not turn it off automatically (Disable).	Enabled	Disabled/Enabled	Keyless control module
Power off mode	The setting can be set to transit the power supply either to OFF (Direct) or to ACC (Stepwise) when the push button start is pressed to turn off the engine.	Direct	Direct/Stepwise	Keyless control module

Keyless Entry Start System

• For the keyless entry system, refer to the control system personalization features setting. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.)