LIGHTING SYSTEM PERSONALIZATION

id091800013300

•  A personalization function has been adopted with which settings for each function can be changed.
•  The Mazda Modular Diagnostic System (M-MDS) is required to perform the setting. Refer to the workshop manual for the detailed setting procedure.

Auto Light System Personalization Table

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Settings

Control module
Autolamp On Setting
The auto light system sensitivity can be adjusted.
Standard (Except Japan)
Extra high (Except Japan)/High (Except Japan)/Standard (Except Japan)/Low (Except Japan)/Extra low (Except Japan)
BCM

Note
•  When the system is set to “Extra High (Except Japan)” or “High (Except Japan)”, because the illumination level required to illuminate the TNS and headlight increases, the TNS and headlights illuminate when the ambient light is brighter than when the system is set to “Standard (Except Japan)”. When the system is set to “Extra Low (Except Japan)” or “Low (Except Japan)” because the illumination level required to illuminate the TNS and headlight decreases, the TNS and headlights illuminate when the ambient light is darker than when the system is set to “Standard (Except Japan)”.
•  Other than the above conditions, a “Japan Only” command is also displayed, however, do not select the command because it is for use in Japan.
•  Auto light sensitivity setting illuminates/turns off the headlights (LO) and TNS according to the following illumination level.
Note
•  The following illumination level is a reference. It varies depending on conditions in the surrounding area (weather, reflection off buildings).

Settings
Illumination operation
Lights off operation
TNS ON
TNS OFF
Headlights (LO) ON
Headlights (LO) OFF
Extra high (Except Japan)
4,000 lux
8,000 lux
High (Except Japan)
3,000 lux
6,000 lux
Standard (Except Japan)
2,000 lux
4,000 lux
Low (Except Japan)
1,000 lux
2,000 lux
Extra low (Except Japan)
500 lux
1,000 lux