BODY CONTROL MODULE (BCM) CONFIGURATION

id094000800900

1.  Connect the M-MDS to DLC-2.

am3uuw00003491

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select “Module Programming”.

2.  Select “Programmable Module Installation”.

3.  Select “BCM/GEM”.

3.  Perform the configuration according to the directions on the screen.

4.  Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

•  If a DTC(s) is detected, perform the applicable DTC inspection. (See DTC TABLE [BCM].)