WHEEL APRON PANEL COMPONENT INSTALLATION [PANEL REPLACEMENT]

id098008614800

Symbol Mark

am3uub00000146

Installation Procedure

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  Drill holes for the plug welding before installing the new parts.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Plug weld the 8 locations indicated by (A) shown in the figure.

am3uub00000256

5.  Plug weld the 11 locations indicated by (B), 5 locations indicated by (C) shown in the figure.

6.  Plug weld the 4 locations indicated by (D) from the front wheel housing.

am3uub00000257

7.  Plug weld the 18 location indicated by (E) shown in the figure while install the wheel apron conponent.

am3uub00000258