APRON REINFORCEMENT (LOWER) INSTALLATION [PANEL REPLACEMENT]

id098008741400

Symbol Mark

am3uub00000129

Installation Procedure

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  Drill holes for the plug welding before installing the new parts.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Spot weld the 25 location indicated by (A) shown in the figure while install the apron renforcement lower.

am3uub00000130

5.  Plug weld the 6 location indicated by (B) shown in the figure while install the front fender bracket front and front fender bracket rear.

am3uub00000131