INAPPROPRIATE OPERATION AND CONTROL RECORD [SKYACTIV-D 1.5]

id0102q2042900

How to Use

Note

• Because the inappropriate operation and control record cannot be cleared, always check the odometer value and verify that repairs have not already been performed.

• If any inappropriate operation and control record is displayed, refer to the corresponding troubleshooting for the inappropriate operation and control code to explain to the customer, and perform malfunction diagnosis. (See Inappropriate Operation and Control Code Table)

Operation Procedure

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initial screen.

(1) “Operational Record”

3. Then, select the followings from the screen menu.

(1) “Inappropriate Operation and Control Record”

(2) “PCM”

4. Display the DTC store record history according to the screen instructions.

Inappropriate Operation and Control Code Table

Inappropriate operation and control code

Inappropriate operation and control code type

Reference

0x51

Cold condition damage prevention control

(See INAPPROPRIATE OPERATION AND CONTROL RECODE 0x51 (COLD CONDITION DAMAGE PREVENTION CONTROL) [SKYACTIV-D 1.5].)

0x52

Injection amount limiting control depends on excess rotation speed of turbocharger with variable turbine geometry

(See INAPPROPRIATE OPERATION AND CONTROL RECODE 0x52 (INJECTION AMOUNT LIMIT CONTROL DUE TO THE TURBOCHARGER OVERSPEED) [SKYACTIV-D 1.5].)

Inappropriate operation and control code	Inappropriate operation and control code type	Reference
0x51	Cold condition damage prevention control	(See INAPPROPRIATE OPERATION AND CONTROL RECODE 0x51 (COLD CONDITION DAMAGE PREVENTION CONTROL) [SKYACTIV-D 1.5].)
0x52	Injection amount limiting control depends on excess rotation speed of turbocharger with variable turbine geometry	(See INAPPROPRIATE OPERATION AND CONTROL RECODE 0x52 (INJECTION AMOUNT LIMIT CONTROL DUE TO THE TURBOCHARGER OVERSPEED) [SKYACTIV-D 1.5].)