RESISTOR INSPECTION

id071100016400

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)

2.  Remove the following parts:

(1)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(2)  Side wall (passenger-side) (See SIDE WALL REMOVAL/INSTALLATION.)

(3)  Front heat duct (passenger-side) (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

(4)  Resistor (See RESISTOR REMOVAL/INSTALLATION.)

3.  Verify that the resistance between the resistor terminals is as shown in the table.

am3zzw00011049

•  If there is any malfunction, replace the resistor.

Terminal	Resistance (ohm)
A—D	0.35—0.41
A—B	0.95—1.09
A—C	2.68—3.08