AIR BAGS
id087000000100
Purpose of Adoption
• Servicing improvement
Service Point
• The driver-side air bag module is fixed by three hook pins on the module side and 3 snap springs on the steering wheel side. The driver-side air bag module can be installed easily because a tool is not required.
• When removing the driver-side air bag module, first disconnect the negative battery cable, and then with the steering shaft tilted down, pull it out and place it on the passenger side. Insert the rod-like parts into the core cover holes on the surface of the spoke side, and press the snap springs to remove the pins. With the pins removed, remove the horn and inflator wiring harnesses because the wiring harnesses are still connected.
Common Inquiry
• Not applicable
Other
• Not applicable