PID/DATA MONITOR TABLE [REAR VEHICLE MONITORING SYSTEM]


id0902z2960700

—: Not applicable

PID name

Unit/Status

Data contents

Module control terminal

AIM_ANGL_L
° (deg)
Displays radar aiming correction angle corrected by rear vehicle monitoring control module (LH) when performing rear vehicle monitoring radar aiming.
AIM_ANGL_R
° (deg)
Displays radar aiming correction angle corrected by rear vehicle monitoring control module (RH) when performing rear vehicle monitoring radar aiming.
H, J (CAN)
Buzzer
Off/On
•  Off: Rear vehicle monitoring (RVM) warning alarm does not sound.
•  On: Rear vehicle monitoring (RVM) warning alarm sounds.
A, D (CAN)
INTNL_TMP_L
°C, °F
Displays rear vehicle monitoring control module (LH) internal temperature.
INTNL_TMP_R
°C, °F
Displays rear vehicle monitoring control module (RH) internal temperature.
H, J (CAN)
MAIN_SW
Off/On
•  Off: RVM switch not pressed
•  On: RVM switch pressed
A, D (CAN)
OP_BRT_L
Displays the RVM warning indicator light (LH) output brightness.
OP_BRT_R
Displays the RVM warning indicator light (RH) output brightness.
H, J (CAN)
RVM_SYS_ST
Off/Passive_On/Active_On/Failure
•  Off: Rear vehicle monitoring system does not operate.
•  Passive_On: Rear vehicle monitoring system is on standby.
•  Active_On: Rear vehicle monitoring system operates.
•  Failure: Rear vehicle monitoring system malfunction
H, J (CAN)
TURN_SW_L
Off/On
•  Off: Turn switch is in position other than LH.
•  On: Turn switch is in LH position.
A, D (CAN)
TURN_SW_R
Off/On
•  Off: Turn switch is in position other than RH.
•  On: Turn switch is in RH position.
A, D (CAN)
VPWR_L
V
Displays rear vehicle monitoring control module (LH) power supply voltage.
I (Power supply)
VPWR_R
V
Displays rear vehicle monitoring control module (RH) power supply voltage.
H, J (CAN)
VSPD
KPH, MPH
Displays the vehicle speed.
A, D (CAN)
YAW_RATE
°/s
•  —: Vehicle is stopped or while moving straight ahead.
•  Exceeds 0°/s: Vehicle tilted left.
•  Less than 0°/s: Vehicle tilted right.
A, D (CAN)