POWER OUTER MIRROR SYSTEM
id091200012700
Outline
• Power outer mirrors which can be operated remotely have been adopted.
Structural View
System Wiring Diagram
With retract/return function
Without retract/return function
Function
Mirror glass adjustment function
-
• Outer mirror glass can be adjusted up/down and left/right electrically.
IG OFF timer function (with retractable power outer mirrors)
-
• The power outer mirror switch can be operated for approx. 40 s after the ignition is switched from ON to ACC or OFF.
IG OFF timer cancel (with retractable power outer mirrors)
-
• The IG OFF timer is canceled when approx. 40 s or more have elapsed since the ignition was switched to ACC or OFF or any door is opened during IG OFF timer operation.
Operation
With retract/return function
-
Mirror glass adjustment (Example: Left outer mirror is adjusted upward)
-
1. When the upward switch is turned on (1), current from the P/W CM to the transistor flows and the transistor turns on.
2. The FET turns on when the transistor turns on and current flows (2).
3. With current flowing, the up/down adjustment motor moves in the upward direction (3).
-
IG OFF timer (Example: retract operation)
-
1. When the ignition is switched to ACC or OFF from the ON position (engine off or on), the IG OFF timer function in the P/W CM is turned ON and the power outer mirror switch can be operated for approx. 40 s after the IG OFF is detected.
2. If retract operation is performed using the power outer mirror switch when the IG OFF timer is ON, the retract/return motor performs a retract operation (1).
3. If approx. 40 s have elapsed after the P/W CM detects IG OFF, the IG OFF timer function turns off.
-
IG OFF Timer Cancel
-
1. The P/W CM detects the open/close conditions of all the doors based on the door open/close signal sent from the rear body control module (RBCM).
2. When a door open signal is sent from the rear body control module (RBCM) while the IG OFF timer is on, the IG OFF timer function is canceled.
Without retract/return function
-
Mirror glass adjustment (Example: Left outer mirror is adjusted upward)
-
1. When the upward switch is turned on (1), the up/down adjustment motor operates upward.(2)
Fail-safe
• Function not equipped.
