REAR BODY CONTROL MODULE (RBCM) BRACKET REMOVAL/INSTALLATION


id094000003000

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the following parts:

1.  Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)
2.  Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)
3.  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
4.  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)
5.  Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION.)
6.  Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
7.  Tire house trim (LH) (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
8.  Trunk side upper trim (LH) (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)
9.  Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
10.  Rear body control module (RBCM) (See REAR BODY CONTROL MODULE (RBCM) REMOVAL/INSTALLATION.)

3.  Remove the bolts.

am3uuw00010074

4.  Remove the screw.

5.  Remove the rear body control module (RBCM) bracket.

6.  Install in the reverse order of removal.