POWER SEAT SYSTEM


id099000001000


Purpose of Adoption

•  Memory operation conditions have been reviewed in consideration of safety.

Service point

•  Not applicable

Common Inquiry

•  If any one of the following conditions (1) or (2) is met, automatic seat positioning of the recorded seat position is possible with one touch (MT vehicles).
1.  Ignition is switched off
2.  Ignition is switched ON, vehicle speed is less than 3 km/h {2 mph}, and parking brake is applied
•  If any one of the following conditions (1) or (2) is met, automatic seat positioning of the recorded seat position is possible with one touch (AT vehicles)
1.  Ignition is switched off
2.  Ignition is switched ON, vehicle speed is less than 3 km/h {2 mph}, and shift lever is in P position

Other

•  Not applicable