ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION (ABS, DYNAMIC STABILITY CONTROL)

id040200100300

• The PID/data monitor function is used for optionally selecting input/output signal monitor items preset in the ABS HU/CM or DSC HU/CM and reading them out in real-time.

PID/DATA Monitor Table (Vehicles with ABS)

WDS or equivalent display

Input/output part name

Unit/Operation

(WDS display)

BOO_ABS
Brake switch
On/Off
CCNTABS
DTC (amount detected)
-
LF_WSPD
ABS wheel-speed sensor (LF)
km/h, mph
LR_WSPD
ABS wheel-speed sensor (LR)
km/h, mph
RF_WSPD
ABS wheel-speed sensor (RF)
km/h, mph
RR_WSPD
ABS wheel-speed sensor (RR)
km/h, mph

PID/DATA Monitor Table (Vehicles with DSC)

WDS or equivalent display

Input/output part name

Unit/Operation

(WDS display)

BOO_ABS
Brake switch
On/Off
CCNTABS
DTC (amount detected)
-
ESP_VOLT
IVD/DSC sensor supply voltage
V
LAT_ACCL
Combined sensor (lateral-G sensor)
G
LF_WSPD
ABS wheel-speed sensor (LF)
km/h, mph
LR_WSPD
ABS wheel-speed sensor (LR)
km/h, mph
MPRETDR
Brake fluid pressure sensor
kPa, psi, Bar
RF_WSPD
ABS wheel-speed sensor (RF)
km/h, mph
RR_WSPD
ABS wheel-speed sensor (RR)
km/h, mph
SWA_POS
Steering angle sensor
°
TCYC_FS
DSC HU/CM
On/Off
TCYC_SW
DSC OFF switch
Depressed/Not Depressed
YAW_RATE
Combined sensor (yaw rate value)
°/s