PID/DATA MONITOR TABLE [STANDARD DEPLOYMENT CONTROL SYSTEM]

id0802b1800800

PID name (definition)

Unit/Condition

Operation Condition (Reference)

Terminal

CCNT_RCM

(Number of continuous DTCs)

—

•  DTCs detected: 1—255

•  No DTCs detected: 0

—

DABAGR

(Driver-side air bag module resistance)

Ohm

Under any condition: 1.5—3.7 ohms

1I, 1M

DFCURTRES

(Driver-side curtain air bag module resistance)

Ohm

Under any condition: 1.4—3.2 ohms

Note

•  0 ohm is indicated on vehicles without the curtain air bags.

2AG, 2AK

DR_BUKL

(Driver-side buckle switch status)

Buckled/

Unbuckled

•  Driver-side buckle switch on: Buckled

•  Driver-side buckle switch off: Unbuckled

2W

DR_PTENS

(Driver-side pre-tensioner front buckle resistance)

Ohm

Under any condition: 1.5—3.1 ohms

2J, 2N

DS_AB

(Driver-side side air bag module resistance)

Ohm

Under any condition: 1.4—3.2 ohms

Note

•  9.9 ohms is indicated on vehicles without the side air bags.

2B, 2F

I_PAD_FLT

(PAD switch status)

OK/

Fault

•  PAD switch normal: OK

•  PAD switch abnormal: Fault

1P

I_PAD_SW

(PAD switch status)

ON/

OFF

•  PAD switch is at PASS AIRBAG ON position: ON

•  PAD switch is at PASS AIRBAG OFF position: OFF

1P

PABAGR

(Passenger-side air bag module resistance)

Ohm

Under any condition: 1.4—2.9 ohms

1J, 1N

PFCURTRES

(Passenger-side curtain air bag module resistance)

Ohm

Under any condition: 1.4—3.2 ohms

Note

•  0 ohm is indicated on vehicles without the curtain air bags.

2AH, 2AL

PS_AB

(Passenger-side side air bag module resistance)

Ohm

Under any condition: 1.4—3.2 ohms

Note

•  9.9 ohms is indicated on vehicles without the side air bags.

2I, 2M

PS_PTENS

(Passenger-side pre-tensioner front buckle resistance)

Ohm

Under any condition: 1.5—3.1 ohms

2A, 2E

D_ABAGR2

Ohm

Note

•  Used for the diagnosis of the two-step deployment control system. When it is displayed using the standard deployment control system, 9.9 ohms is indicated.

-

P_ABAGR2

Ohm

PID name (definition)	Unit/Condition	Operation Condition (Reference)	Terminal
CCNT_RCM (Number of continuous DTCs)	—	• DTCs detected: 1—255 • No DTCs detected: 0	—
DABAGR (Driver-side air bag module resistance)	Ohm	Under any condition: 1.5—3.7 ohms	1I, 1M
DFCURTRES (Driver-side curtain air bag module resistance)	Ohm	Under any condition: 1.4—3.2 ohms Note • 0 ohm is indicated on vehicles without the curtain air bags.	2AG, 2AK
DR_BUKL (Driver-side buckle switch status)	Buckled/ Unbuckled	• Driver-side buckle switch on: Buckled • Driver-side buckle switch off: Unbuckled	2W
DR_PTENS (Driver-side pre-tensioner front buckle resistance)	Ohm	Under any condition: 1.5—3.1 ohms	2J, 2N
DS_AB (Driver-side side air bag module resistance)	Ohm	Under any condition: 1.4—3.2 ohms Note • 9.9 ohms is indicated on vehicles without the side air bags.	2B, 2F
I_PAD_FLT (PAD switch status)	OK/ Fault	• PAD switch normal: OK • PAD switch abnormal: Fault	1P
I_PAD_SW (PAD switch status)	ON/ OFF	• PAD switch is at PASS AIRBAG ON position: ON • PAD switch is at PASS AIRBAG OFF position: OFF	1P
PABAGR (Passenger-side air bag module resistance)	Ohm	Under any condition: 1.4—2.9 ohms	1J, 1N
PFCURTRES (Passenger-side curtain air bag module resistance)	Ohm	Under any condition: 1.4—3.2 ohms Note • 0 ohm is indicated on vehicles without the curtain air bags.	2AH, 2AL
PS_AB (Passenger-side side air bag module resistance)	Ohm	Under any condition: 1.4—3.2 ohms Note • 9.9 ohms is indicated on vehicles without the side air bags.	2I, 2M
PS_PTENS (Passenger-side pre-tensioner front buckle resistance)	Ohm	Under any condition: 1.5—3.1 ohms	2A, 2E
D_ABAGR2	Ohm	Note • Used for the diagnosis of the two-step deployment control system. When it is displayed using the standard deployment control system, 9.9 ohms is indicated.	-
P_ABAGR2	Ohm		-