AIR BAG SYSTEM OUTLINE [TWO-STEP DEPLOYMENT CONTROL SYSTEM]

id0810001001b1

• The air bag system is a device that supplements the passenger restraint function of the seat belts. The air bag system will not have the designed effect if the seat belts are not worn properly.
• The air bag system is composed of the following parts:

Item

Outline

SAS control module
• Two-step deployment control has been added to the front air bag system (driver and passenger-side) deployment control.
• Recognizes actually equipped air bag module or pre-tensioner front buckle based on module configuration.
Crash zone sensor
• Detects degree of impact, converts to an electrical signal, and sends the signal to the SAS control module. For operation, refer to SAS control module, Air Bag Module and Pre-tensioner Front Buckle Deployment Operation. (See SAS CONTROL MODULE CONSTRUCTION/OPERATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM])
Side air bag sensor
Driver-side air bag module
• Dual inflators, inflator 1 and inflator 2, have been adopted in accordance with the front air bag system two-step deployment control.
Passenger-side air bag module
Side air bag module
• Chest-protection type side air bag module is used in accordance with the adoption of the curtain air bag module.
Curtain air bag module
• Adopted to improve safety in lateral collisions.
Pre-tensioner front buckle
• Lead wire type pre-tensioner front buckle has been adopted.
Air bag system warning light
• LED has been adopted.