DTC 06:ER02

id0902f6817700

DTC 06:Er02

CD changer (upper module)

DETECTION CONDITION

Note
• When error occurs, error message "CHECK CD" is displayed in the LCD.
• Cannot play CD normally or change tracks.

POSSIBLE CAUSE

• Defective CD (scratches or dirt)
• CD changer (upper module) malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION

1
Play all the CDs in the changer and change tracks.
Can tracks be changed?
Yes
Go to Step 3.
No
Cannot change to specific tracks.
Go to the next step.
Cannot change to any track.
Change the CD and try to change tracks again.
• If the function is normal, go to Step 3.
• If the function is not normal, replace the CD changer (upper module).
2
Verify the condition of the CD when the error occurs.
Is the CD normal?
Yes
Go to the next step.
No
Repair (remove foreign material, clean) or replace the CD, and go to the next step.
3
Clear the DTC.
Play the CD and change tracks.
Is DTC 06: Er02 displayed?
Yes
Replace the CD changer (upper module).
No
DTC troubleshooting completed.