DRIVE BELT INSPECTION [MZR 2.0 DISI]

id011007801500

Note

•  Drive belt deflection/tension inspection is not necessary because of the use of the drive belt auto tensioner.

1.  Verify that the drive belt auto tensioner indicator mark does not exceed the limit.

•  If it exceeds the limit, replace the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZR 2.0 DISI].)

am6zzw00000664

2.  Visually inspect the drive belt.

•  If any of the following damage occurs to the drive belt, replace the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZR 2.0 DISI].)

―  Cracks

―  Foreign material caught in mechanism

―  Belt loss