FUEL INJECTOR INSPECTION [MZR 2.0 DISI]

id0114d4800700


Resistance Inspection

1.  Disconnect the negative battery cable.

2.  Remove the fuel delivery pipe. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZR 2.0 DISI].)

3.  Disconnect the fuel injector connector.

4.  Inspect the resistance between fuel injector terminals A and B.

acxuuw00000038

Fuel injector resistance
1.0—1.2 ohms [20 °C {68 °F}]
•  If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZR 2.0 DISI].)