BATTERY RECHARGING [MZR 1.8, MZR 2.0, MZR 2.5]
id0117c8800700
-
Warning
-
• Keep all flames away from the battery, otherwise evaporated gas from the battery fluid may catch fire, and cause serious injury.
• Remove the battery filler caps when recharging to prevent battery deformation or damage.
-
Caution
-
• Do not quick charge for more than 30 min. It will damage the battery.
1. Remove the battery and then place it in a pan of water.
2. Remove the battery filler caps.
3. Connect a battery charger to the battery and adjust the charging current as follows.
-
Battery slow charge current
-
55D23L (48 A·h/5HR, 55 A·h/20HR): 4.5—5.5 A
75D23L (52 A·h/5HR, 65 A·h/20HR): 5.0—6.0 A
80D26L (55 A·h/5HR, 65 A·h/20HR): 5.5—6.5 A
-
Battery quick charge current [30 min]
-
55D23L (48 A·h/5HR, 55 A·h/20HR): 30 A
75D23L (52 A·h/5HR, 65 A·h/20HR): 35 A
80D26L (55 A·h/5HR, 65 A·h/20HR): 35 A
4. After the battery is recharged, verify that the voltage is within the specification and remains at the same value for 1 h or more after the recharging has been completed.
-
• If not within the specification, replace the battery.
-
Standard voltage
-
12.4 V or more
