SPARK PLUG REMOVAL/INSTALLATION [MZR 2.0 DISI]

id0118c5800400

Caution

•  If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

1.  Disconnect the negative battery cable.

2.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 2.0 DISI].)

3.  Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [MZR 2.0 DISI].)

4.  Remove the spark plugs using a plug-wrench.

5.  Install in the reverse order of removal.