MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [MZR 1.8, MZR 2.0, MZR 2.5]

id0140d7800900

1.  Connect the M-MDS to the DLC-2.

am6zzw00002683

2.  Switch the ignition to ON.

3.  Verify that the voltage (M-MDS PID: MAP) within the specification.

•  If not as specified, replace the MAP sensor. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)