CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [MZR 1.8, MZR 2.0, MZR 2.5]

id0140d7801600

1.  Verify that the CPP switch is installed properly.

2.  Disconnect the negative battery cable.

3.  Disconnect the CPP switch connector. (See CLUTCH PEDAL REMOVAL/INSTALLATION [A26M-R].)

4.  Inspect for continuity between the CPP switch terminals using an ohmmeter.

am6zzw00000807

•  If not as specified, replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [A26M-R].)