INTAKE SHUTTER VALVE POSITION SENSOR INSPECTION [MZR-CD 2.2]

id0140f2445800

Note

•  Perform the following test only when directed.

Sensor Output Value Inspection

1.  Switch the ignition to ON.

2.  Monitor the ISV_POS PID using the M-MDS.

―  If not as specified, replace the intake shutter valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR-CD 2.2].)

3.  Start the engine and warm up the engine completely.

4.  Monitor the ISV_POS PID using the M-MDS at idle.

―  If not as specified, replace the intake shutter valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR-CD 2.2].)