EXHAUST GAS PRESSURE CORRECTION TEMPERATURE SENSOR INSPECTION [MZR-CD 2.2]

id0140f2446200

Note
•  Perform the following test only when directed.

Resistance Inspection

1.  Remove the exhaust gas pressure correction temperature sensor. (See EXHAUST GAS PRESSURE SENSOR/EXHAUST GAS PRESSURE CORRECTION TEMPERATURE SENSOR REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.  Place the exhaust gas pressure correction temperature sensor in water with a thermometer, and heat the water gradually.

3.  Measure the resistance between the exhaust gas pressure correction temperature sensor terminals using an ohmmeter.

•  If not as specified, replace the exhaust gas pressure correction temperature sensor. (See EXHAUST GAS PRESSURE SENSOR/EXHAUST GAS PRESSURE CORRECTION TEMPERATURE SENSOR REMOVAL/INSTALLATION [MZR-CD 2.2].)

Specification

Water temperature (°C {°F})

Resistance (kilohm)
20 {68}
2.21—2.69
80 {176}
0.29—0.35

am6zzw00004019